Airtest CT1000 & CT2100 Gas Sensors
AirTest CT1000 & CT2100 gas sensors for many applications. High quality sensors, can be used on line voltage 115VAC or 220VAC and 24VAC, making it compatible to any AirTest’s remote gas sensing transmitters (TR2000, TR3200, TR5200, TR5500).
ALL AIRTEST GAS SENSORS ARE PRECALIBRATED AT THE FACTORY. NO ADDITIONAL CALIBRATION IS REQUIRED.
CT1000 – 115VAC & CT1000-24VAC Single Gas Controller, 115VAC or 24 VAC: Durable single gas controller that can be used with any AirTest transmitter with a 4-20 mA output (TR2000, TR3200, TR5200) Should be ordered with sensor with low and high level activation concentrations identified and transmitter model no . Switches 115VAC power with 5A relays. Metal enclosure with LED status indication. Can be parallel wired for multiple controllers to power fan activation. CSA Listed (UL Equivalent)
CT2100 – 115VAC-TR2000x2 & CT2100-24VAC-TR2000x2 Two Point CO Sensor/Controller, 115VAC or 24 VAC: Durable dual channel on/off controller used to measure CO in two locations to power a fan. Designed to be powered by and switch 115VAC power. Controller is provided with two TR2000 CO transmitters that are remotly mounted. Incorporates three (3) 10A relays for control level activation, high level alarm and fault indication. Adjustable time delay on and off response. Metal Enclosure with LED status indication. Can be parallel wired for multiple controllers to power fan activation. CSA Listed (UL Equivalent)
- Note: When Used with the TR3210, controller it is not integrated with sensor. Must be ordered and installed separately.
- Temp Range :-4 to 122ºF (-20 to 50ºC)
- Integrated high and low concentration relays(5A).
- Power options: 24 VAC, 115 VAC, 220 VAC
- User adjustable delay for on-time (up to 30 minutes).
Data Sheet CT1000 / CT2100.pdf