RT365 – 360 in.lb. (40 Nm) Torque Actuator. 60-85 Seconds Rotation. With Feedback. 2 Position or 3 Point Floating Control. 120 VAC or 240 VAC Power Required. With Enerdrive failsafe system.
These R Series quarter turn actuators may be directly coupled to either a 3/4 inch round or 5/8 inch square jack shaft or remotely mounted using an adaptor kit. All actuators are bi-directional. Enerdrive actuators are also bi-directional under fail safe conditions. The stroke may be limited to less than 90° mechanically in digital models (with SLD sold separately) and electronically in Multi Signal models.
Primary uses: large size air handlers, 1/4 turn valves.
Power Supply: 24Vac/30Vdc
Power Consumption: Peak at Start-up: 10VA to 40VA at 26Vac Depending upon the Model
Wire Size: Operating at Full Load: 10VA to 24VA at 26Vac Depending upon the Model
Electrical Connections: 18 AWG (0.8 mm2 ) Minimum Two 7/8 in. (22.2 mm) Knock Outs, Screw Terminals
There are no reviews yet.